How to Formulate your Own Palm Oil Free Soap Recipes

Posted by on

Interested in learning more about soap making? I host regular FREE online workshops, guiding you step by step on how to make soap! Register below to be the first one to know when new dates are published, or learn more here

    If you want to learn how to make your own soap, there are a few terms which are very specific to soap making that you need to first understand fully. These terms are used to describe the way a soap maker decides to handle the recipe he/she is formulating to creating a particular soap.

    Superfatting or Lye Discount

    Every oil has a unique saponification value - the SAP value. This value determines the amount of sodium hydroxide necessary to transform the oil into soap. If you use less sodium hydroxide than wha the recipe calls for, you can obtain a more moisturising - or to better say - "superfatted" soap.

    By leaving behind some "unsaponified" oil does not mean that there will be oil dripping off your soap, but simply that the soap will be more moisturising. This process is also called "superfatting".

    Instead, if we use the right amount of lye, every bit of oil would turn into soap. A "0%" superfat or no lye discount is more suitable for a laundry soap. 

    superfatting soap vegan

    A common superfatting percentage is "5%" but many people also like using higher percentages such as 10% and even 20% superfatting. A higher percentage of superfatting is normally used when you want your soap to be particularly moisturising. However, bear in mind that more unsaponified oil means also a greater risk of the oil spoilage.

    An example of a high superfat could be the one of coconut oil soap. If you want to make 100% coconut oil soap, you will need at least a 20% superfatting or else the soap will be way too drying for the skin due to coconut being very cleansing. If you choose to make a 100% coconut oil with 0% superfat, it will make a great washing up soap for dishes (check out my laundry soap recipe here!).

    100% vegan oil coconut oil soap

    Water Discount

    Sodium Hydroxide is normally formed by small granules or flakes and needs to be dissolved into a liquid in order to form a “lye solution”. The liquid doesn't necessarily need to be water, but you could also use different liquids such as milks, aloe vera, tea, herbal infusions to name a few.

    Technically there is no maximum amount of water you could use, but the more water you use, the softer the soap and the longer it will need to cure. Whatever liquid you are using, remember that lye cannot dissolve itself into a solution smaller than its weight. 

    You can however apply what it’s called a “water discount”. This simply means deducting some water to whatever your recipe is calling for. Why would you do that? This will make the lye solution a bit more concentrated, but it will also allow the soap to unmould and cure faster, while saving some water at the same time. 

    soap making cure time

    Keep in mind that every bit of water in your soap will need to evaporate for the soap to become mild and usable (this happens during the curing period). This is why the soap is considered still caustic when it’s just being unmoulded, and it will become milder and milder the longer it cures. The cure period is 4-6 week, but I find a period of 6 weeks is better, and the soap becomes extra mild after 3-4 months of cure time.

    Below are the most common water/lye ratios:

    Full Water

    The most common ratio is called “full water”:

    Ratio: 1:3 (1 part lye, 3 parts water)
    In percentages: Water: 75%, lye: 25%

    Mild Water Discount

    Another popular water discount is closer to a lot default setting, you will find in online lye calculators.

    Ratio: 1:2.5 (1 part lye, 2.5 parts water)
    In percentages: Water: 71.4%, lye: 28.6%

    Moderate Water Discount

    A moderate water discount is one of the most manageable and flexible if you want to do some designs.

    I personally use this across most of my recipes as it allows for a much shorter cure time, and a firmer soap out the mould.

    Ratio: 1:2 (1 part lye, 2 parts water)
    In percentages: Water: 66.7%, lye: 33.3%

    Strong Water Discount

    A strong water discount can be applied for different reasons. First of all, you may want to apply a strong water discount if you are adding liquid additives, which will increase the amount of water in your soap. For example, if you are adding fruit of vegetables, which contain water in it, or if you are adding milks at trace. In this case, you can remove the amount of liquid you want to add at trace from your lye solution.

    Experienced soap makers who know that their ingredients will not accelerate trace too much and are making a simple, plain soap with no designs may also decided to apply a strong water discount.

    Ratio: 1:1.5 (1 part lye, 1.5 parts water)
    In percentages: Water: 60%, lye: 40%

    Maximum Water Discount

    Ratio: 1:1 (1 part lye, 1 parts water)
    In percentages: Water: 50%, lye: 50%

    What is your favourite superfat or water discount? Do you have any questions? Let me know in the comment below!

    ← Older Post Newer Post →



    Leave a comment

    Please note, comments must be approved before they are published